2019 Ford F550 Cable Placer Truck - Stock# 19B0019

Stock# 19B0019


Plus Taxes & Licensing
2019 Ford F550 Cable Placer Truck
Max combined capacity platform load plus cable down load is 350 lbs. (158.7 kg).
Max cable download is 50 lbs.
Upper controls consist of a single stick, toggle switches and emergency stop.
Heavy duty intercom system for communication between cab and platform.
Engine start/stop system with controls at platform and remote handheld lower controls.
370° non-continuous rotation with a mechanical stop.
Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)
External hydraulic oil reservoir with 6 gal. (23 l) capacity.
Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom is housed within the outer boom.
End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fabricated steel tube platform includes hinged door with slam latch and safety chain.
Master/slave hydraulic leveling with control to tilt for cleanout or rescue.
Non lube bearings used at all pivot points.
Multi link hose carrier system through booms.
Rubberized boom cradle
Backup pump providing power to all boom functions and emergency lowering.
Mounting hardware for chassis/cab installation.
Handheld remote lower control with series of spring loaded toggle switches and control selector switch
GFCI receptacle for 120 volt power at platform
Single pneumatic airline to platform.
Full body harness and lanyard.
Painted standard white urethane.
Two operator’s manuals and two service manuals.
ANSI A92.2 data plate.BODY SPECS:
12 gauge tread plate floor with 6” structural channel frame
40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
Stainless steel automotive rotary type door latches and chain stops on all doors
Rubber rolled crown type fenders
30” tread plate tail shelf with 7-lamp light bar and two (2) oval cutouts for strobe lights
Curbside single recessed step with belt step and grab handles
Master door lock, hook and loop system on each door with two (2) spring loaded door handles (unlocked)
Wheel chock holders curbside
Removable composite tailgate installed at rear of load space.
Curb side compartments as follows:-
1st Vertical: Two (2) adjustable shelves with adjustable dividers.
2nd Vertical: Access steps to bed with cable access step and removable composite side gate.
Horizontal: Open
Rear Vertical: Five (5) fixed material hooks (1-3-1)
Street Side Compartments as follows:-
1st Vertical: Two (2) adjustable shelves with adjustable dividers.
2nd Vertical: Two (2) adjustable shelves with adjustable dividers.
Horizontal: One (1) adjustable shelf with dividers.
Rear Vertical: Five (5) fixed material hooks (1-3-1)CHASSIS SPECS:
2019 Ford F-550 4×2 cab and chassis.
GVWR 19,500 lb. payload plus upgrade package.
84” cab to axle.
6.8L 3-valve SOHC EFI V10 gasoline engine
TorqShift 6-speed automatic transmission includes SelectShift.
4.88 limited slip axle.
Air conditioning.
225/70R19.5G BSW AS tires.
Snow plow prep package.
Aft-Axle frame extension pack.
Trailer brake controller (TBC)
Rear view camera and prep kit
AM/FM radio.
Painted Oxford White.
Vehicle Specs
Model Year2019
Cab StyleStandard
Air ConditioningYes
Gross Vehicle Wt Rating (GVWR)19,500
Stock Number19B0019
Engine & Drivetrain
Fuel TypeGas
Number of Rear Axles1
Tires11R 22.5
Body Specs
Body TypeBucket Truck – Placer
Serial NumberVV180080
Working Height41′
MountBehind Cab
PlatformEnd Mounted, ONE Man
**With Manufacturer Warranty
  • There are no features available
Category:Bucket Trucks Up to 45
Category 2:VersaLift
Category 3:New Ariel Trucks
Stock #:19B0019
Back to top