| VersaLift Trucks- Lower Cost Ownership BOOM SPECS: SST36NE
Standard platform capacity of 350 lbs. (158.7 kg).
Upper controls consist of a series of spring loaded toggle switches and a master control switch.
Engine start/stop system with controls at platform and remote handheld lower controls.
370° non-continuous rotation with a mechanical stop.
Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)
External hydraulic oil reservoir with 6 gal. (23 l) capacity.
Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom is housed within the outer boom.
End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fiberglass platform.
Manual rotator for platform.
Master/slave hydraulic leveling with upper control to tilt for cleanout or rescue.
Non lube bearings used at all pivot points.
Multi link hose carrier system through booms.
Rubberized boom cradle
12 volt DC backup pump providing power to all boom functions.
Mounting hardware for chassis/cab installation.
Handheld remote lower control with series of spring loaded toggle switches and control selector switch
GFCI receptacle for 120 volt power at platform
Full body harness and lanyard.
Painted standard white urethane.
Two operator’s manuals and two service manuals.
ANSI A92.2 data plate. BODY SPECS:
12 gauge tread plate floor with 6” structural channel frame
40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
Stainless steel automotive rotary type door latches.
Chain stops on all doors
Rubber rolled crown type fenders
Removable composite tailboard installed at rear.
30” tread plate tail shelf with 7-lamp light bar installed.
Master locking system.
Curb side compartments as follows:-
1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers
Horizontal: Open
Rear Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers
Street Side Compartments as follows:-
1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers
Horizontal: One (1) removable shelf with dividers on 6 inch centers
Rear Vertical: Five (5) fixed material hooks (1-3-1) CHASSIS SPECS:
2021 Ford F-450 4×2 cab and chassis with a 60” cab to axle.
16,000 lb. GVWR.
6.8L 3-valve SOHC EFI V10 gasoline engine
TorqShift 6-speed automatic transmission.
4.88 limited slip axle.
225/70R19.5G BSW A/P tires.
XL value package includes 4.2”center-stack screen and SYNC communications system
Power equipment package includes power windows, door locks and remote keyless entry.
Steering wheel mounted cruise control.
Radio: AM/FM stereo/MP3 player.
Trailer brake controller
Snow plow prep package includes extra heavy duty suspension.
Rear view camera and prep kit.
Painted Oxford White. | 
