2020 International CV515 4x4 Bucket Truck - Stock# 20B0162

Stock# 20B0162

$112,900

Plus Taxes & Licensing
Description
2020 International CV515 4×4 Bucket Truck
VersaLift Trucks- Lower Cost Ownership
BOOM SPECS:
Standard platform capacity of 350 lbs. (158.7 kg).
VERSALIFT TruGuard™ 2.0 dielectric isolating system with right hand single stick control. All control handles are isolated and tested per ANSI 92.2. The high resistive dielectric system is protected from direct environmental and job related contamination. TruGuard™ 2.0 technology incorporates the use of full hydraulic controls with durable metal handles and linkages.
180° hydraulic platform rotator.
Full pressure turret mounted lower controls including override.
Engine start/stop system with controls at platform and lower controls.
Continuous unrestricted rotation including three pass collector ring.
Three gpm (11.4 lpm) open center hydraulic system.
Chassis insulating system (lower boom insert) including fiberglass compensation link providing 12 inches (0.30 m) insulation gap.
Fiberglass inner boom and patented ELECTROGARD providing 42 in. (1.07 m) insulation gap fully retracted meeting ANSI A92.2 requirements for Category C, 46 KV and below.
Hydraulic tool power at bucket. Quick disconnect couplers not included.
ELECTROGARD and inner boom finished with white urethane paint over white gel coat.
Integral hydraulic oil reservoir with dual sight gauges and 15 gal. (56.8 l) capacity.
End mounted closed 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fiberglass platform with one step, liner and cover.
Master/slave hydraulic leveling with upper control to tilt for clean-out and rescue. Leveling control at lower controls.
Non lube bearings used at all pivot points.
Multi link hose carrier system through booms.
Boom cradle and ratchet type tie down strap.
Two speed throttle control.
12 volt DC backup pump providing power to all boom functions.
Mounting hardware for chassis/cab installation.
Full body harness and lanyard.
Painted standard white urethane.
Two operator’s manuals and two service manuals.
ANSI A92.2 data plate.BODY SPECS:
24” tread plate tail shelf.
Cable access step at rear and side access.
Two (2) chrome grab handles at side access and two (2) pool type grab handles for rear tail shelf.
Stainless steel automotive rotary door latches with chain stops on all doors.
LED lighting package installed in tail shelf with additional cutouts for strobe lights
Master door lock hook and loop system on each door with two (2) spring loaded door handles. Excludes 1st vertical curbside.
Wheel chock storage on curbside.
Grey Zolatone paint on the interior of compartments
Street side Compartmentation:
1st Vertical: Two (2) adjustable shelves with dividers.
2nd Vertical: One (1) adjustable shelf with dividers.
Horizontal: Open.
Rear Vertical: Two (2) adjustable shelves with dividers.
Hot stick shelf with rear access door.
Curbside Compartments:
1st Vertical: Two (2) adjustable shelves with dividers
2nd Vertical: Gripstrut access steps to bed area with removable composite side gate.
Horizontal: Open.
Rear Vertical: Five (5) fixed material hooks (1-3-1)
Vehicle Specs
ManufacturerInternational
Model Year2020
ModelCU515
Drive4×4
Cab StyleStandard
Air ConditioningYes
MilesNEW
ColorWhite
Gross Vehicle Wt Rating (GVWR)19,500
Price$112,900
FOBNorco
Stock Number20B0162
Engine & Drivetrain
Engine Model6.6L DSL
Fuel TypeDiesel
TransmissionAuto
BrakesHydraulic
SuspensionSpring
Number of Rear Axles1
WheelsSteel
Body Specs
Body TypeBucket Truck
ManufacturerVersalift
ModelSST-40-EIH
Year2020
Serial NumberEH190437
Working Height45′
MountBehind Cab
PlatformEnd Mounted, One Man
Capacity350lbs
BasketTelescopic
Comments
**With Manufacturer Warranty
  • There are no features available
Year:2020
Category:Bucket Trucks Up to 45
Category 2:VersaLift
Category 3:New Ariel Trucks
Model:CU515
Drivetrain:4X4
Transmission:Auto
Stock #:20B0162
Back to top